To Next PageTo Next Page
Need help?Do you have a question about the SolaX Power X3-MIC G2 Series and is the answer not in the manual?
General| Brand | SolaX Power |
|---|---|
| Model | X3-MIC G2 Series |
| Category | Inverter |
| Language | English |
Defines the applicability and scope of the user manual.
Identifies the intended audience for this manual.
Explains the meaning of symbols used throughout the document.
Describes the intended and correct use of the inverter.
Explains the phenomenon and the inverter's protection against it.
Highlights critical safety hazards, including risks of death or serious injury.
Details potential hazards like burns or minor injuries from product parts.
Covers grounding requirements and leakage current protection.
Provides a detailed explanation of all safety and indicator symbols.
Lists relevant European directives and standards for the inverter.
Outlines the key technological features and capabilities of the inverter series.
Identifies and describes the various connection terminals on the inverter.
Provides the physical dimensions and packing sizes of the inverter.
Details the voltage, current, and MPPT range specifications for DC input.
Lists specifications related to AC voltage, current, frequency, and power.
Details the inverter's efficiency ratings and built-in safety features.
Covers operating temperature, humidity, altitude, ingress protection, and cooling.
Instructions on inspecting the inverter for damage after shipping.
Lists the components included in the inverter package.
Lists important safety and environmental considerations for installation site.
Provides detailed instructions and required tools for mounting the inverter.
Guides on connecting photovoltaic modules to the inverter's DC inputs.
Details requirements for connecting the inverter to the public AC grid.
Recommends appropriate fuses and cables for AC output and mains connection.
Instructions for properly grounding the inverter.
Overview of available ports for data communication and monitoring.
Explains how to connect meters and other devices via RS485 interface.
Describes setting up multiple inverters in parallel using Datahub.
Details how to integrate the inverter with an EV charger for energy management.
Provides instructions for updating the inverter's firmware via USB.
Steps and indicators for successfully starting up and operating the inverter.
Explains the functions of the inverter's LCD screen and buttons.
Guides on navigating through different levels and parameters on the LCD.
Details how to use the LCD for viewing data and performing operations.
Outlines the organization and access to various configuration settings.
Provides in-depth information on what is shown on the main LCD interface.
Explains how to access menus and view the inverter's operating status.
How to configure the inverter's language and system date/time.
Details how to set country-specific safety standards and parameters.
Guides on managing energy export and Demand Response Management.
Explains settings related to grid interaction and voltage/frequency support.
Covers setting power limits and controlling reactive power output.
Options for MPPT scanning and resetting energy/meter data.
Settings for PV connection type and dry contact for heat pumps.
Configuration for Modbus communication, EV charger, and other devices.
Viewing energy data and system error logs.
Accessing product serial number, manager, and internal code.
Provides solutions for common inverter errors and fault messages.
Guidelines for periodic inspection and cleaning of the inverter.
Procedures for safely removing and packing the inverter.
Recommendations for storing and disposing of the inverter and its components.
Lists conditions under which SolaX will not provide service or compensation.
Instructions and links for registering the inverter's warranty online.
