What does BST_HW_OCP mean on my SolaX Power Inverter and how to fix it?
If your SolaX Power Inverter displays a BST_HW_OCP error, check whether the PV input is short circuited. Try restarting the inverter. If the issue continues, contact the installer.
What does BST_SW_OCP mean on my SolaX Power X3-Forth and how to fix it?
If your SolaX Power Inverter displays a BST_SW_OCP error, check whether the PV input is short circuited. Try restarting the inverter. If the issue persists, contact the installer.
What to do if SolaX Power X3-Forth Inverter displays PV01_Reverse error?
If your SolaX Power Inverter displays a PV01_Reverse error, check whether the electrical connection of the PV module is correct. If problems persist, contact the installer.
What to do if my SolaX Power X3-Forth Inverter shows Grid_Loss error?
If your SolaX Power Inverter displays a Grid_Loss error, first check if the grid voltage is normal. Then, check the power grid electrical connection AC switch. Finally, try restarting the inverter.
What does Freq_Cfg_Err mean on my SolaX Power Inverter?
If your SolaX Power Inverter displays a Freq_Cfg_Err error, check whether the state / power grid directive is set correctly. If problems persist, contact the installer.
What does Remote_Off mean on my SolaX Power X3-Forth Inverter and how to fix it?
If your SolaX Power Inverter displays a Remote_Off error, send the startup command through the app or web interface to re-run the inverter. If the issue continues, contact the installer.
Why does my SolaX Power X3-Forth show a Meter_Oppsite error?
If your SolaX Power Inverter displays a Meter_Oppsite error, confirm whether the current direction of the meter is correct. If problems persist, contact the installer.
What to do if SolaX Power Inverter shows ISO_Fail error?
If your SolaX Power Inverter displays an ISO_Fail error, check the PV electrical connection and the grounding of the inverter. If problems persist, contact the installer.
What does GridPhase_Loss mean on my SolaX Power X3-Forth and how to fix it?
If your SolaX Power Inverter displays a GridPhase_Loss error, first check the grid voltage. Next, check the power grid electrical connection AC switch. Finally, try restarting the inverter.
What to do if SolaX Power Inverter displays GridVol_OP_INST error?
If your SolaX Power Inverter displays a GridVol_OP_INST error, check whether the grid voltage is within the allowable range. Then, try to re run the inverter.
General| AC Frequency | 50/60 Hz |
|---|---|
| THD | <3% |
| AC Output Voltage | 230Vac |
| Operating Temperature | -25~+60°C |
| Cooling | Smart Air Cooling |
| Cooling Method | Smart Air Cooling |
To Next Page
