25
IX 、Maintenance
There are few parts of SOLAX scooter require maintenance.
The following issues must be checked and maintained periodically:
The connection of the battery and electrodes
● Ensure the electrode connections are tight and have no corrosion.
● The battery should be placed flatly inside the battery holder.
Wire Connector
● Check all the wire connectors regularly.
● Check all the wiring insulation condition, including the plug of the charger regularly
● Repair or change the damaged connector and connector joint.
ABS Plastic Cover
● Control panel, front cover, footboard and back cover are all made by durable ABS
plastic with baking finish on the surface. Do not use oil or other chemical liquids to
wipe the scooter. In order to prevent the electrical components from damage, do not
wash the scooter from the tap directly.
Bearings and Motor/Transmission Parts
● The components have injected lubricant and are sealed; therefore, it is unnecessary to inject
lubricant any more.
● Protect all the electronic components from moisture, such as control panel, battery charger
and other electric controlled components.
● If some components become damp, please dry it before use.
To Next Page
Loading...
Need help?
General
