Getting familiar with the control panel
• E95 Console
Fan
Dot matrix
Display view
Program buttons/
numeric key pad
Heart rate
indicator
Heart rate
bar graph
Message
Jow
Display view
Fan
power switch
Control keys
Power up
The E95 Elliptical is supplied with an external AC power cord. When power is connected to the
Elliptical, the console will automatically power up. If there is no input to the console for 20 minutes
the console will go to stand-by mode. In stand-by mode the console display will turn off. To turn the
console on press any key.
When initially powered on the console will perform an internal self-test. During this time all the lights
will turn on. When the lights go off the dot matrix display will show a software version (i.e.: VER 1.0)
and the message window will display an odometer reading. The odometer reading displays how
many hours the elliptical has been used and how many virtual miles the elliptical has gone. The
display will look like this: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles of the programs and the
message window will be scrolling the start up message. You may now begin to use the console.
22 E55 / E95 Elliptical
To Next Page
Loading...
