SOLINTEG M Series - AC Connection; AC Side Requirements

30
User Manual
MHT-25~50K series
※ 5.2 AC Connection
5.2.1 AC Side Requirements
①


②


③



④


NOTICE
A three-phase AC breaker needs to be installed on the AC side of the MHT 25~50K. To en-
sure that the MHT 25~50K can safely disconnect itself from the power grid when an excep-


The allowable AC cable of wire diameter and cross-sectional area for Solinteg MHT 25~50K

Figure 5-4
Determine whether an AC circuit breaker with greater overcurrent

NOTICE
Wire󶀅Diameter
20-30mm
Cross-sectional Area


2
2