17
• 1600 Pa wind load / 5330 Pa snow load
Figure 3. SOLID Pro P(M).60 and Bifacial B.60 mounting with eight fixing points and transversal rails.
Using four Alumero CLICK 6.8 200 mm clamps allows for the panel to achieve 5330 Pa of snow loads
and 1600 Pa of wind loads.
It is normal that at loadings higher than 1600 Pa panels will touch the transversal rails. Please make
sure that the rail surface is smooth, because even the smallest sharp edge can cause fast mechanical
failure. If the rail surface is not smooth, sharp edges occur, it is recommended to use rail gaskets to
even the touching surface.
To Next Page
Loading...