4
1 General requirements
Thank you for choosing SoliTek panels!
Please read this guide in it’s entirely before the installation.
The purpose of this document is to provide minimum requirements and recommendations for safe
and successful installation of SoliTek PV modules.
This document also contains requirements necessary to retain SoliTek PV module compliance with
IEC 61215 and IEC 61730 standards.
This guide contains basic information regarding JSC “SoliTek Cells” SOLID series photovoltaic
modules, their installation and safe handling. All instructions should be read and understood before
attempting installation. If there are any questions, please contact your dealer or JSC “SoliTek Cells”
for further information.
This documentation refers to the PV-modules themselves and is not meant to be a complete
installation manual for personnel not specifically trained to PV-modules. It serves as a general but
strictly mandatory to the Installer reference. Infringement or inaccurate observance of any clause of
this documentation voids the warranty.
The installer must understand and follow all applicable local, state, and federal regulations and
standards for building construction, electrical design, fire, and safety, and must check with local
authorities to determine applicable permitting requirements before attempting to install or maintain
PV modules and should become familiar with the mechanical and electrical requirements for
photovoltaic systems.
Failure of follow instructions in this guide may damage system components, endanger personnel,
damage property, or invalidate the panel warranty.
To Next Page
Loading...
Need help?
General