19
Figure 5. Mounting using bolts on the transversal bars.
Mounting with bolts can be done only through dedicated predrilled holes in the frame
Drilling new holes is forbidden and will void the warranty.
7 Maintenance
In order to ensure optimum module performance, SoliTek recommends the following: If necessary,
the glass front of the module can be cleaned with water and a soft sponge or cloth. A mild, non-
abrasive detergent can be used to remove more stubborn stains. Check the electrical and mechanical
connections periodically and make sure they are clean, safe, complete and secure. In the event of a
problem, consult with a licensed/qualified person.
To Next Page
Loading...
Need help?
General