To Next PageTo Next Page
Need help?Do you have a question about the Sollatek FreoCom FCA 3 Series and is the answer not in the manual?
Mounting and installation requirements for the device.
Specifies temperature limits for device operation.
Guidelines to protect the device from physical damage.
States that internal parts are not user-serviceable.
Requirements for power supply voltage compatibility.
Information on surge protection and potential damage.
Guidelines for connecting loads and ensuring safe termination.
Instructions on separating power and signal cables.
Discusses potential damage from connected component failures.
Advice on using the device only for its intended purpose.
Explains hazards associated with live electrical parts.
Provides methods to minimize the risk of electric shock.
Instructions on first aid preparedness before work.
Guidelines for the safe disposal of electronic waste.
Overview of the FCAx3 electronic refrigeration controller.
Details the different models of the FCAx3 controller.
Explains how the FCAx3 controls temperature using NTC probes.
Describes features for reducing energy consumption in refrigeration.
Details the defrost management functions of the FCAx3.
Covers built-in voltage and compressor protection features.
Illustrates the normal operation of the controller.
Details the standard defrost cycle triggering and termination.
Describes pre- and post-defrost settings for enhanced efficiency.
Ignores sensor readings for a short period after compressor start.
Prevents compressor stops due to short voltage fluctuations.
Describes cellular connectivity for remote monitoring via online portal.
Details Wi-Fi geo-location for asset tracking.
Provides physical dimensions and mounting hole patterns.
Step-by-step guide for mounting the FCAx3 unit.
Crucial safety and connection information for wiring.
Steps to test the basic temperature regulation function.
Procedures for testing the defrost modes.
How the FCAx3 detects and reacts to mains frequency issues.
Procedures for detecting and handling regulation probe faults.
Guide to installing and using the desktop configuration software.
Steps for installing and logging into the configuration software.
Overview of the main window of the configuration interface.
Methods for programming the SPP02 programmer device.
Steps to download parameters using the software's home window.
Settings related to the physical hardware of the FCAx3.
Configuration options for relays #2 and #3.
General| Brand | Sollatek |
|---|---|
| Model | FreoCom FCA 3 Series |
| Category | Controller |
| Language | English |
