To Next PageTo Next Page
Need help?Do you have a question about the Sollatek JEA and is the answer not in the manual?
Details the JEA controller's front display panel and its indicators.
Explains the rear connector panel for input, output, and data cables.
Provides the physical dimensions and panel cut-out requirements for installation.
Details the procedures for front and rear mounting of the JEA controller.
Covers standard AC wiring procedures for the JEA controller.
Covers AC and DC wiring procedures for the JEA controller.
Explains the functionality and control of Day and Night operational modes.
Details the parameters and triggers for the defrost mode operation.
Covers the JEA's self-learning capabilities for energy saving and usage patterns.
Details the protective delays like temperature blind time and voltage blind time.
Explains Bluetooth, GSM, Geolocation, and external display connectivity options.
Describes the JEA front display, menu list, and operational flow charts.
Guides on installing and using the Smart Device Application for controller management.
Lists parameters for temperature regulation in various modes (Normal, Eco, Superfrost).
Explains defrost start timer types, thresholds, and durations.
Details various delay and timer settings for compressor and load operations.
Covers parameters related to door open/close events and alarms.
Outlines the procedure for programming the JEA using the SPP03 programmer.
Details the steps for programming the JEA using the ST-Link programmer.
Describes faults related to door switch, regulation, evaporator, condenser, and ambient sensors.
Lists and explains various alarm codes displayed for different faults.
Summarizes temperature control methods, ranges, modes, defrost, and energy saving.
Lists output controls, relay ratings, and connector types used in the JEA.
Covers mounting options, operating conditions, dimensions, weight, and certifications.
Details the JEA controller's front display panel and its indicators.
Explains the rear connector panel for input, output, and data cables.
Provides the physical dimensions and panel cut-out requirements for installation.
Details the procedures for front and rear mounting of the JEA controller.
Covers standard AC wiring procedures for the JEA controller.
Covers AC and DC wiring procedures for the JEA controller.
Explains the functionality and control of Day and Night operational modes.
Details the parameters and triggers for the defrost mode operation.
Covers the JEA's self-learning capabilities for energy saving and usage patterns.
Details the protective delays like temperature blind time and voltage blind time.
Explains Bluetooth, GSM, Geolocation, and external display connectivity options.
Describes the JEA front display, menu list, and operational flow charts.
Guides on installing and using the Smart Device Application for controller management.
Lists parameters for temperature regulation in various modes (Normal, Eco, Superfrost).
Explains defrost start timer types, thresholds, and durations.
Details various delay and timer settings for compressor and load operations.
Covers parameters related to door open/close events and alarms.
Outlines the procedure for programming the JEA using the SPP03 programmer.
Details the steps for programming the JEA using the ST-Link programmer.
Describes faults related to door switch, regulation, evaporator, condenser, and ambient sensors.
Lists and explains various alarm codes displayed for different faults.
Summarizes temperature control methods, ranges, modes, defrost, and energy saving.
Lists output controls, relay ratings, and connector types used in the JEA.
Covers mounting options, operating conditions, dimensions, weight, and certifications.
General| Brand | Sollatek |
|---|---|
| Model | JEA |
| Category | Controller |
| Language | English |
