9
5. Charging
1. Turn off the device, then connect the device with a computer, car charger or an AC adaptor by the USB
charging cable. ( The Geotagger Pro can be charged using any 5V standard USB charger )
2. Around three hours the device will be in full power. The battery indicator in the LCD will show the
power status.
3. When the internal battery is fully charged, disconnect the Pro from the computer, car charger or AC
adaptor.
NOTE
The built-in rechargeable battery cannot be replaced by users; it needs to be replaced by our
professional technician if it needs servicing.
Auto Meter off
Nikon added a new function to the D3x, D3s, D3, D700, D300s, D300 and D90, D5000. The new
function resolved a battery drain issue by allowing the user to select the metering system to stay On
or auto Off when GPS signals are received to reduce power consumption.
To access this function on your Nikon camera, please follow the step below:
Menu→ Custom Settings Menu→ (C) Timers/ AE Lock→ c2 Auto meter- off delay
To Next Page
Loading...
