ENGLISH 2
Preface
Dear Customer,
Congratulations for choosing this SOLO quality
product.
The Models 121 and 129 brushcutters, with
newly developed 25 cm
3
/ 29 cm
3
high performance
engines, are especially lightweight and easy to
handle. The professional design makes assembly and
use easy.
The proven technology used in the Nikasil-
coated vertical cylinder 2-cycle engine guarantees
high performance and low fuel consumption.
The easy-start primer system assures a quick,
reliable start-up. The straight shaft with a reinforced
tube dampens vibration by means of special-
elastomer isolation. The multifunction grip with half
throttle lock, throttle lever and stop switch, as well
as the easily accessible air filter, allow for easy
servicing and low fatigue operation.
Prior to operating the unit, please read the
owner’s manual carefully, and most importantly,
observe all safety rules.
In order to maintain the performance of the
brushcutter, it is necessary to carefully follow the
service instructions.
Your dealer will be glad to assist you with any
questions.
CE Declaration of conformity
In accordance with EG Directives 98/37/EC, 2000/14/EC and
89/336/EEC (amended by 92/31/EEC), SOLO Kleinmotoren
GmbH, Stuttgarter Strasse 41, D-71069 Sindelfingen, being
solely responsible, states that the product referred to in
this declaration complies with the requirements of the
Machinery Directive.
121 129
Sound power level (DIN45635)
Guaranteed sound 110 110 dB(A)
Actual sound 105 106 dB(A)
Applied standards: EN 11806
Conformity assessment procedures Appendix V
This declaration of conformity loses its validity, if the
equipment is converted or modified without the
manufacturer's consent.
Sindelfingen,
1
st
January 2004
SOLO Kleinmotoren GmbH Wolfgang Emmerich
Executive Director
Symbols
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety
shoes with a good tread
Always handle this power tool with
particular care
Never exceed the specified
maximum speed
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the
power tool and the fuel can
- This equipment produces exhaust
fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces
Packaging
The packing materials used to protect the unit
against damage during transportation are cartons
made from pulp, which can be re-used or recycled.
To Next Page
Loading...
