Solo 129 - Accessories

Accessories
ENGLISH 20
10. Accessories
Via dealers, SOLO offers an extensive range of brushcutter accessories. Their use is limited to the particular model
to which it is allocated, together with its relevant protection. Orientate yourself on the following table and check
with your dealer.
Approved for model
Accessory Protection Part no.
121L 121B 129L 129B 129LTS 129BTS
2 nylon head semi-automatic
M 10 x 1.25 LI
(grass, even around obstacles, light weeds)
Standard protection +
protective bar +
line trimming blade
69 00 651
X
X
2 nylon head semi-automatic
M 10 x 1.25 LI
(grass, even around obstacles, light weeds)
Standard protection +
protective bar +
line trimming blade
69 00 652
X
X
X
X
Replacement line for nylon head 15m, Ø2.4 mm
69 00 942
X
X
X
X
X
X
3-blade mowing disc "Rototrim"
(grass, light weeds)
Standard protection +
protective bar
69 00 945
X
X
X
X
X
X
Grass cutter blade 4 teeth, Ø230 mm
(grass, stronger weeds)
Standard protection 69 00 948
X
X
X
X
X
X
Brush blade 3 teeth Ø250 mm
(bushes, reeds, tough grass)
Standard protection 69 00 947
X
X
X
X
Cutter head "Jet-Fit-Flexiblade"
(bushes, reeds, tough grass, branches up to 20mm)
Standard protection +
protective bar
69 00 160
X
X
X
X
X
X
Replacement line for "Jet-Fit-Flexiblade" cutter
head
69 00 166
X
X
X
X
X
X
Pruning attachment
(pruning trees)
69 00 229
X
X
X
Hedge trimmer attachment
69 00 227
X
X
Shaft extension for
pruning and hedge trimmer attachments
69 00 608
X
Double shoulder strap
63 00 300
X
X
X
X
X
X
Profi-Double shoulder strap
63 00 351
X
X
X
X
X
X
High performance gearbox grease
00 83 180
X
X
X
X
X
X
In addition and especially for model 129LTS, the following accessory sets are available, where the tool is already
pre-assembled on the lower shaft section. Just replacing the lower shaft section enables a simple and quick
conversion, without requiring the working tool to the dismantled/assembled.
Hedge trimmer attachment, pre-assembled on the lower shaft section
69 00 228
129LTS
Cultivator attachment, pre-assembled on the lower shaft section 69 00150
129LTS
For both models with sectional shaft (129LTS and 129BTS) a nylon head, pre-assembled on the lower shaft
section – also for quick conversion – is available.
Nylon head and shield, pre-assembled on the lower shaft section
69 00 859 129LTS and 129BTS