- ENGLISH - Blower tube 440 / Vacuum shredder 441
ENGLISH 2
Instruction manual
Original instructions
Caution! Prior to operating the unit, please
read the owner’s manual carefully, and most
importantly, observe all safety rules.
Dear Customer,
Congratulations for choosing this SOLO quality
product.
A single-cylinder, two-stroke motor withvnickel-
coated cylinder in proven SOLO technology
insures high performance and low fuel
consumption and high machine serviceability.
This power tool has many special features - a
powerful air stream, a unique anti-vibration
system, which effectively removes motor vibrations
from the handle, excellent operating convenience,
easy conversion from blower to vacuum device
(available as accessory for model 440) and
excellent starting characteristics.
SOLO constantly strives to continuously
develop its products. Consequently Solo must
reserve the right to make changes in form,
technology and fittings.
No claims can be derived from the illustrations
or information contained in these operating
instructions.
To maintain the function and the performance
of this power tool over a long period of time you
should precisely comply with the operating and
maintenance instructions.
If you should have further questions after
studying these operating instructions, your dealer
would be pleased to help you.
EC declaration of conformity Î The EC
declaration of conformity on a separate piece of
paper forms part of these operating instructions.
Packaging and disposal
Please keep the original packaging in order to
protect the equipment against transport damage in
case you ever need to ship it or transport it. If the
packaging materials are no longer required then
they must be disposed of properly in accordance
with applicable local regulations. Cardboard
packaging materials are raw materials which can
be recycled or reused.
At the end of the equipment’s service life, please
make sure that you dispose of it properly, in
accordance with the official directives and
regulations that apply in your area.
Symbols / type plate
The following symbols are used in this manual and
on the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling and
working with the equipment
Wear solid shoes, preferably safety shoes
with a good tread
Always handle this power tool with
particular care
Please note: objects may be thrown out
and high
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the power
tool and the fuel can
- This equipment produces exhaust fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces
Choke open
Warm start and operating setting
Choke closed
Cold start setting
Type plate:
a: Type designation
b: Serial number
c: Build year (07 Î 2007)
To Next Page
Loading...
