Standard delivery; Control and function elements
ENGLISH 8
4. Standard delivery
• Standard equipment partially pre-assembled; the following parts are included and must be fitted
• Blower fittings:
Blower pipe to be fitted to the standard machine
Round air nozzle to be fitted to the blower pipe
Flat nozzle attachment to be fitted to the round air nozzle (if required) with edge protector
clip
• Vacuum attachment (only model 441; with model 440 as accessory; part no: 49 00 546)
Vacuum pipe
Exhaust air elbow to be fitted to the catcher with a fixing clip
Catcher with strap system
• Combi tool (spark plug spanner and screwdriver)
• Instruction manual, the EC declaration of conformity on a separate piece of paper
5. Control and function elements
Blower operation:
Fig. 1
To Next Page
Loading...
