soloprotect Go - Incapacitation Alarm

6
Incapacitation Alarm
Quick Start Guide
Function: Incapacitaon detecon is used to raise an alert if you have
fallen or collapsed.
How to use: SoloProtect Go will detect a potenal incapacitaon
scenario if it detects movement indicang a potenal, sudden fall. The
device will enter a pre-alarm phase for sixty seconds - all LEDs will flash
and the device will emit alarm tones and vibrate connuously. This
indicates detecon, but an alarm is not raised at this point.
The pre-alarm phase is cancelled by a user pressing the Power buon on
the SoloProtect Go to indicate, they are not incapacitated.
The device will give two long vibraons to indicate the pre-alarm phase is
cancelled. If the Power buon is not pressed, an Incapacitaon Alarm will
be raised within the SoloProtect Alarm Receiving Centre (ARC).
Power buon