23
INDICATION PROBLEM SOLUTION
E30 Door is not closed properly
• Restart after the door is closed
• Check if there are clothes or washing articles stuck
E10
Water injecting problem
while washing
• Check if the water pressure is too low
• Straighten the water pipe
• Check if the inlet valve filter is blocked
E21 Overtime water draining • Check if the drain hose is blocked
E12 Water overflow • Restart the washer
Note: If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/Off” button.
• Switch off the appliance at the power outlet and remove the plug.
• Call our customer service team.
To Next Page
Loading...
Need help?
General
