Soltec HM-102S User Manual

3.1.2. Frequently inspect the test leads and the
Instrument for damage and/or deteriorating insulation
and replace faulty items immediately.
3. 1. 3. Never work alone with high voltage circuits.
3. 1. 4. Before connecting the Instrument to a circuit,
become familiar with the circuit to determine the
highest voltage levels likely to be encountered.
3. 1. 5. The small size of this Instrument might tempt
the user to hold it while making measurements. Avoid
this practice especially when working in circuits that
might contain a shock hazard.
3. 1. 6. Develop safe habits by turning off the power
to the measured circuit and discharge any capacitors
before handling the test leads.
3.1.7. If the approximate value of the voltage or
current to be measured is not known, always set the
Instrument to its highest range for the first measure-
ment to determine the proper range to be used.
3.1. 8. Electrical measurements to be made in the
scammed by scruss nm Zfll7'll'lZ ' nlease Eng! freely but leave this message tttttt

Soltec HM-102S Specifications

General

Brand	Soltec
Model	HM-102S
Category	Measuring Instruments
Language	English