Need help?Do you have a question about the SOMFY Dexxo Pro RTS Series and is the answer not in the manual?
General| Type | Garage Door Opener |
|---|---|
| Motor Type | DC Motor |
| Power Supply | 230V AC |
| Max Door Weight | 100 kg |
| Max Door Width | 5 m |
| Radio Frequency | 433.42 MHz |
| Control System | RTS (Radio Technology Somfy) |
| Operating Temperature | -20°C to +60°C |
| Protection Rating | IP20 |
| Remote Control Range | Up to 30 meters |
| Warranty | 5 years |
| Safety Features | Obstacle detection |
| Installation Type | Ceiling mounted |
Crucial safety advice for installation and use to prevent injury.
Product description and compliance with standards for safety.
Checks before installation: door condition, mechanical aspects, and environment.
Requirements for power supply, fuse, differential device, and cut-off.
Safety measures during installation like removing cords and avoiding danger zones.
List of components included in the product kit with reference figures.
Intended use of the motorisation for residential garage doors.
Declaration of conformity with European directives.
Contact information for questions or difficulties during installation.
Identification of hazardous areas and measures to prevent risks.
Guidelines for setting the correct installation height based on door and ceiling measurements.
Step-by-step guide for assembling and mounting the motorisation system.
Explanation of the function of each button on the motor unit for programming.
Procedure for setting the door's open and closed limits and automatic learning.
How to store remote controls for total opening function.
Instructions for operating the door using remote controls.
How the obstacle detection system works during door movement.
Operation and features of the integrated lighting system.
Importance of training end-users on safe operation and maintenance.
List and description of optional peripherals that can be connected.
Detailed wiring instructions for connecting peripherals to the motor unit.
Explanation of the different programmable parameters and their settings.
How to set a specific partial opening position for the door.
Function to manually operate the door in case of faults or loss of remote control.
Storing remote controls for partial opening function.
Storing remote controls for operating the integrated lighting.
Storing specific types of remote controls.
Method to add remote controls without direct access to the motor unit.
Procedure to delete all programmed remote controls.
Procedure to reset all system settings to default values.
Explanation of codes displayed during normal operation.
Explanation of codes displayed during programming or setup.
Troubleshooting codes indicating errors or failures and required actions.
How to view stored data like cycle counts and fault logs.
Detailed technical specifications of the motor unit.
Information on compatible connections for peripherals.
Specifications related to the operational modes of the motor unit.
Physical dimensions and overall lengths of the product.
To Next Page