To Next PageTo Next Page
Need help?Do you have a question about the SOMFY Dexxo Pro and is the answer not in the manual?
General| Maximum Door Weight | 100 kg |
|---|---|
| Operating Temperature Range | -20°C to +60°C |
| Remote Control Frequency | 433.42 MHz |
| Operating Voltage | 24 V DC |
| Protection Rating | IP44 |
| Motor Type | DC Motor |
| Remote Control | Included |
| Warranty | 5 years |
| Power Supply | 230V AC |
| Maximum Force | 600N |
| Maximum Door Height | 3m |
| Power Consumption | 370W |
| Safety Features | Obstacle detection |
| Battery Backup | Optional |
Important safety instructions for installation and use.
General guidelines for safe installation practices.
List and identification of the main components of the system.
Details on compatible door types and specific kits.
Essential checks on the garage door mechanism and environment before installation.
Mandatory safety compliance during the entire installation process.
Guidelines for determining correct mounting height based on door and ceiling.
Steps for mounting the motor head, lintel bracket, door bracket, and rail.
Adjusting travel stops, checking tension, and connecting mains power.
Explanation of the functions of each button on the programming interface.
Procedure for teaching the motor drive the door's travel limits and settings.
Instructions for programming remote controls to operate the motor drive.
Basic operation of the door using remote controls.
Testing and ensuring the safety feature that detects obstacles during operation.
Overview of available optional accessories and their functions.
Wiring instructions for safety sensors, indicator lights, and warning signals.
Wiring for access controls, safety kits, power backup, and lighting.
Overview of the setup configuration parameters and their meanings.
Configuration of operating modes, warning lights, safety inputs, and obstacle detection.
Adjusting door sensitivity, speeds, partial opening, and light timing.
Procedure to erase all memorized remote control transmitters.
Procedure to restore all system settings to their default values.
Explanation of codes displayed on the LCD indicating motor status and operation.
Explanation of codes related to programming and settings.
Explanation of error codes and troubleshooting actions for faults.
Information on how to access stored data like cycle counts and fault logs.
