Need help?Do you have a question about the SOMFY Elixo 800 and is the answer not in the manual?
General| Brand | SOMFY |
|---|---|
| Model | Elixo 800 |
| Category | Gate Opener |
| Language | English |
Read installation and safety instructions before installing the Somfy product.
Specific safety precautions for gate installation and operation, including checks and user safety.
Lists all components included in the standard kit for the Elixo motor.
Provides the physical dimensions of the Elixo motor unit.
Defines the maximum gate weight and daily manoeuvre limits for the Elixo system.
Illustrates the typical installation of various components with the gate mechanism.
Details the components, connections, and functions of the Elixo control unit.
Explains the meaning and status of each indicator light on the control unit.
Describes the role of the starter capacitor in the MR/08 relay module.
Explains how the MR/08 relay module provides optical signals for gate status.
Details how to adjust motor force and impact detection sensitivity.
Pre-installation checks on the gate, rails, and mechanical end stops.
Instructions for opening the motor unit casing.
Steps for fitting the motor's mounting system to a concrete base.
A complete diagram showing all electrical connections for the system.
Guidance on installing cable grommets for proper cable management and protection.
Recommendations for optimal aerial installation for radio reception.
Detailed wiring instructions for motor connections based on gate orientation.
Instructions for connecting the main 230V power supply to the unit.
Procedure for memorizing 2 or 4 button remote controls using the PROG button.
How to exit the remote control programming mode without saving.
Step-by-step guide to program gate impact force and slowing zones.
Checks and conditions required before starting the programming of impact force and slowing zones.
How to set operating modes using micro switches SW1 and SW2 for various functions.
Procedure to activate automatic closing with a programmable delay up to 120 seconds.
Steps to disable the automatic closing function of the gate.
How to configure inputs 18 and 19 for specific functions like Open only or Close only.
To Next Page