Need help?Do you have a question about the SOMFY Elixo 500 and is the answer not in the manual?
General| Maximum Gate Weight | 500 kg |
|---|---|
| Maximum Gate Length | 8 m |
| Power Supply | 230 V AC |
| Operating Temperature | -20°C to +60°C |
| Protection Index | IP44 |
| Motor Voltage | 24V DC |
| Motor Type | Electromechanical |
| Control Options | Remote control |
| Maximum Leaf Width | Not applicable |
Provides general installation guidance and compliance information.
Critical safety precautions and requirements before installation.
General guidance and installer responsibilities for the product.
Lists all components included in the standard motorisation kit.
Details the main parts of the motorisation system.
Provides dimensional specifications of the motor unit.
Steps to attach the manual release handle to the motor.
Instructions on how to disengage the motor for manual gate operation.
Guides on installing the base plate and securing it to the concrete base.
Steps for correctly positioning and securing the motor onto the mounting system.
Instructions for attaching limit brackets to the rack for open/close limits.
Illustrates the electrical connections for the motorisation system.
Provides guidelines for optimal aerial installation and placement.
Details on connecting the motor to the main power supply.
Explains how to navigate and use the control unit buttons for settings.
Steps to select the desired language for the control unit display.
Procedure for programming remote controls to the motorisation.
Guides on the automatic gate travel learning process.
How to connect a flashing amber light to the system.
Wiring instructions for connecting photoelectric safety cells.
Details on connecting reflex photoelectric cells with or without autotest.
Instructions for connecting a wired keypad for control.
How to connect a wired keyswitch for gate operation.
Setting the display language on the control unit screen.
Initiates the automatic gate travel learning process.
Adjusting motor torque, speed, and slowing down values.
Selecting motor operating modes and devices.
Configures terminal 21/22 for START or CLOSE operation.
Activates or deactivates the partial gate opening function.
Resets the motor to factory default settings.
Procedure to erase all programmed remote controls.
Resets all motorisation parameters to factory defaults.
Explains system messages and status indicators.
To Next Page