SOMFY Glydea WT

To Next Page

To Previous Page

Somfy InstalGuide IWC_A5_2016UK_11.indd 2 04-02-16 11:05

Main Page

Table of Contents3
Overview RTS Options8
Compatibility, Motor-Power Supply-Sensors9
Power Connections: Applications with RTS Integrated Motors10
Basic11
Programming and Setting of RTS Motors11
Connect the RTS Transmitter to the Motor11
Check the Motor Rotation Direction11
Change Motor Rotation Direction if Needed11
Place the Blind in the Desired up Position11
Set the down Position11
Set the up Position12
Conﬁrm End Limit Setting12
Recording an RTS Transmitter12
Adjustments13
Adjusting the down Limit13
Adjusting the up Limit13
Setting My Position for NON TILT Products14
Setting My Position for TILT Products14
Remove Programmed My Position14
Set Type of Blind, Roll up or Tilt and Li Blind15
Wired RTS Receivers, 24 VDC16
RTS Receivers, Setting and Programming17
Setting from the RTS Receiver17
Set the RTS Receiver in Programming Mode17
Record the First RTS Transmitter17
Power 4 X 2,5 DC RTS17
Setting from the RTS Remote Control18
Set Type of Blind: Roll up or Tilt and Li19
Change the Motor Rotation Direction20
Sett the Time for Open and Close Movement21
Modify the MY Position, in Tilt & Li Mode24
Modify the MY Position, in Roll up Mode25
Remove a Programmed MY-Position26
Activating the Motor Run Timer26
Add a Transmitter27
Remove an Assigned Transmitter27
Add or Remove Transmitters28
Factory Reset29
Program Individual Channels to Group Channel30
Sonesse 40 WT, Setting of End Limits31
Glydea, Curtain Track32
Recommendations32
Motor Cable Output Options32
Attach Motor to Rail32
Wiring Guide DCT & RTS32
Glydea RTS, Programming Instruction33
Connect the RTS Transmitter to the Motor33
Check the Motor Rotation Direction33
Change if Needed Motor Rotation Direction33
Record a RTS Transmitter33
Setting My Position34
Re-Adjustment of End -Limits34
Set Touch Motion or Manual over Ride Mode35
Set Track Speed, Default Speed = 20 CM/S35
Glydea DCT, Wiring Control Unit to Glydea DCT36
Add Transmitter36
Reset Motor to Factory Mode, Erase All Settings36
Glydea DCT, Programming Instruction37
Modify Motor Rotation Direction, if Needed37
Re-Adjustment of End -Limits37
Set Touch Motion or Manual over Ride Mode38
Reset Motor to Factory Mode, Erase All Settings38
Programming Instruction39
Modify Motor Rotation Direction, if Needed39
Back Release Setting39
Glydea WT, Wiring Instruction40
Reset Motor to Factory Mode, Erase All Settings40
Sun Sensor Functions41
Deactivate and Activate Privacy Function41
Set the Motor Speed42
Program Sun Disappearing Position42
Set the Tilt Speed / Scroll Wheel Step43
Modify Motor Rotation Direction44
Modify Scroll Wheel Rotation Direction45
Sonesse 30 DCT46
Wiring46
Setting Type of Blind46
Setting of Rolling Speed46
Setting of Tilt Speed47
Reset Motor in Factory Mode47
Wired Controls for Roll up Application48
Setting of My Positions48
Wired Control for Tilt & Li Applications49
Adjust Tilt Speed49
Set Automatic Slat Tilting49
Set My Position - from up End Limit49
Sunis RTS, Adding and Setting50
Connect Sun Sensor51
Check Sun Mode on or off52
Check and Installation53
Set the Demo Mode on53
Switch the Demo Mode off54
Explanations of LED Signals55
Is the Sunis Sensor RTS in DEMO-Mode55
Thermosunis Indoor Wirefree RTS, Adding and Setting56
Thermosunis Indoor Wirefree RTS57
Connect Sun Sensor57
Mounting of Thermosunis Indoor Wire Free RTS58
Usage Options for Thermosunis Indoor Wirefree RTS58
Get Started with Thermosunis Indoor Wire Free RTS59
Activate the Sensor60
Erase the Sensor from the Motor61
Setting of the Sensitivity (Threshold Values)62
DEMO Mode63
Chronis Smart RTS64
Explanation of Display and Key Functions64
Programming Options64
Setting Current Date66
Setting Current Time66
Setting up Time67
Setting the down Time67
Setting Time Shi and Time Limit for COSMIC down Time68
Deactivating the COSMIC Function68
Setting the down Time69
Activating the COSMIC Function69
Activating the Security Function70
Deactivating the Security Function70
Deactivating the Programmed up and down Times70
Activating the Programmed up and down Times70
Special Settings for Use with a Separate RTS Receiver for Window71
Coverings DC RTS and RTS 2.5 DC Modules71
Chronis Comfort RTS72
Explanation of Display and Key Functions72
Programming Options72
Setting Current Time74
Setting Current Date74
Setting up Time75
Setting the 1St up Time to a Fixed Time75
Setting the 2Nd up Time to a Fixed Time76
Activating the Cosmic up Function76
Setting Time Shi and Time Limit for COSMIC up Time77
Deactivating the COSMIC up Function77
Setting the down Time78
Setting Time Shi and Time Limit for COSMIC down Time78
Deactivating the COSMIC down Function79
Setting the 1St down Time to a Fixed Time79
Setting the 2Nd down Time to a Fixed Time80
Activating the COSMIC Function for the 1St down Time80
Light Sensor81
Activating the Light Sensor81
Deactivating the Light Sensor82
Activating the SECURITY Mode82
Deactivating the SECURITY Mode82
Deactivating the Programmed up and down Times83
Activating the Programmed up and down Times83
Special Settings for Use with a Separate RTS Receiver for Window83
Coverings DC RTS and RTS 2.5 DC Modules83
Time Control for Intermediate Position (MY Position)84
Time Command for the Intermediate Position in Combination with up Time, down Time and the "Light Command85
Telis 6 Chronis RTS User Manual87
Composition88
Getting Started89
Installing the Batteries89
Remote Control Set-Up89
Naming the 6 Channels91
Adding Telis 6 Chronis RTS91
Erasing 6 Chronis RTS92
Setting Tilt Mode92
Programming the Days of the Week (Automatic Mode)93
Choosing the Day to be Programmed93
Creating an Automatic Command94
Selecting Channels94
Selecting Command95
Copying the Programme from One Day to Another Day95
Erasing an Automatic Command96
Switching between Automatic and Manual97
Manual Mode97
Controlling the Channels97
Automatic Modus98
The "Presence Simulation" Function99
Activating/Deactivating the Sun Function99
Telis 6 Chronis RTS User Manual100
Changing the General Remote Control Parameters100
Telis 6 Chronis RTS User Manual101
Controlling Products101
Setting the Preferred Position ('My')101
Using the Preferred Position101
Attaching the Telis 6 Chronis RTS to the Wall102
Tips and Recommendations102
Telis 6 Chronis RTS User Manual103
Technical Data103
Dimensions103
Programming Moco DCE104
To Change to Li Application104
Setting of End Limits105

SOMFY Glydea WT - Page 2

Table of Contents

Related product manuals