EasyManua.ls Logo

SOMFY LW25 B83 User Manual

SOMFY LW25 B83
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation/programming
guide
Interior applications

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the SOMFY LW25 B83 and is the answer not in the manual?

SOMFY LW25 B83 Specifications

General IconGeneral
BrandSOMFY
ModelLW25 B83
CategoryHome Automation
LanguageEnglish

Summary

IWC RTS & io Motors - Basic Setup

Initial Setup Steps

Core steps for initial motor setup and connection.

Setting UP and DOWN Positions

Defining the upper and lower travel limits for the blind.

Transmitter Programming

Pairing remote controls with the motor.

IWC RTS & io Motors - Limit Adjustments

Adjusting Limit Positions

Fine-tuning the UP and DOWN travel limits.

IWC RTS & io Motors - My Position

Setting My Position (Non-Tilt/Tilt)

Defining preferred intermediate positions for blinds.

24 V RTS Receiver Programming

Programming via Receiver

Configuring receivers using their programming buttons.

24 V RTS Receiver Remote Control

Remote Control Pairing

Pairing a remote transmitter with the receiver.

24 V RTS Receiver MY Position (Tilt/Lift)

24 V RTS Receiver MY Position (Roll Up)

Transmitter Management

Adding and Removing Transmitters

Procedures for managing transmitters.

Replacing Lost Transmitters

Procedure to replace a lost or malfunctioning transmitter.

Factory Reset Procedures

Reset via Button or Power Cycle

Resetting using buttons or power cycling.

Sonesse 40 WT Motor Settings

Setting End Limits

Configuring the upper and lower travel limits.

Curtain Track RTS Programming

Basic Programming Steps

Connecting, checking rotation, and recording transmitters.

Curtain Track RTS Position and Limits

Setting My Position

Defining a preferred intermediate position.

Curtain Track RTS Transmitter & Reset

Adding Transmitters

Adding new transmitters to the system.

Factory Reset

Resetting the motor to factory default settings.

Curtain Track DCT Programming

DCT Motor Programming Basics

Instructions for programming DCT motors.

Advanced Sunsensor Functions

Sunsensor Configuration

Setting up receivers for external sun sensors.

Advanced Motor Control Functions

Li-Ion Motor RTS Management

Li-Ion Motor Battery Replacement

24V Wired Controls - Roll Up

Setting My Positions (Roll Up)

Defining favorite positions for roll-up blinds.

24V Wired Controls - Tilt & Lift

Setting My Position (UP Limit)

Defining favorite position from the UP limit.

Sunis RTS Sensor Setup

Thermosunis Indoor RTS Setup

Thermosunis RTS Getting Started

Thermosunis RTS Activation and Connection

Thermosunis RTS Sensor Removal

Thermosunis RTS Sensitivity Settings

Sunis WireFree II io Sensor Overview

Sunis WireFree II io Sensor Pairing

Programming Moco DCE Controllers

Moco DCE End Limit Settings

TaHoma Connected Home System

TaHoma Configuration and Device Addition

Connexoon Window RTS Setup

Connexoon Window RTS Registration

Related product manuals