Programming Manual
http://www.remotecontrol-express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
1. Approach your receiver. It is located next to your motor.
2. With a sharply pointed object, press the hidden button located behind your remote control
that has already been programmed for 2 seconds (T1, fig 1). The LED light on the receiver
illuminates.
3. With a sharply pointed object, press the hidden button located behind your new remote
control (T2, fig 2). The LED light on the receiver blinks.
4. Wait 10 seconds.
5. Your new remote control is programmed.
To Previous Page
Loading...
