Why does the battery on my SOMNOmedics SOMNO HD NGD050 Medical Equipment drain so fast?
If the battery of your SOMNOmedics Medical Equipment discharges too quickly, it may be worn out. The suggested solution is to change the battery.
What to do if my SOMNOmedics SOMNO HD NGD050 cannot access the memory card?
If your SOMNOmedics Medical Equipment cannot access the memory card and the recording cannot be started, it might be due to an inaccessible SD-card. Check the orientation of the memory card. If it is correctly oriented, try replacing it with a different card.
How to fix performance issues on SOMNOmedics SOMNO HD NGD050 Medical Equipment?
If you are experiencing performance problems with your SOMNOmedics Medical Equipment, a restart of the device is necessary.
Why does my SOMNOmedics Medical Equipment say there is not enough storage capacity?
If there is not enough storage capacity on the memory card of your SOMNOmedics Medical Equipment, it means the SD-card is full.
What to do if the same sensor is connected twice to SOMNOmedics Medical Equipment?
If the same sensor is connected twice to your SOMNOmedics Medical Equipment, the sensor must be removed to continue.
What happens if the wrong headbox type is connected to my SOMNOmedics Medical Equipment?
If the wrong headbox type is connected to the SOMNO HDTM Medical Equipment (for example, connecting an EEG32 channel headbox after initializing with a PSG headbox), recording cannot be started. If recording should be performed with the connected headbox please change the montage.
What happens when the external battery of my SOMNOmedics Medical Equipment is below 5%?
If the capacity of the external battery of your SOMNOmedics Medical Equipment is below 5%, the internal battery is used for the rest of the recording, and the recording is continued.
What happens when the wireless sensor capacity of my SOMNOmedics SOMNO HD NGD050 is below 1%?
If the capacity of the wireless sensor of your SOMNOmedics Medical Equipment is below 1%, the connection between the wireless sensor and SOMNO HDTM is terminated, and no more signals from the wireless sensor are recorded.
General| Category | Medical Equipment |
|---|---|
| Recording Time | Up to 24 hours |
| Connectivity | Bluetooth, USB |
| Compatibility | Windows-based software |
| Power Supply | Rechargeable battery |
| Data Storage | SD card |
| Measurement Parameters | EEG, EOG, EMG, ECG, respiratory effort |
To Next Page
