31
DAB1 DISTRIBUTED AUDIO SYSTEM
6. Open the FILE menu and
select J
OB INFO:
• The D
EALER tab (
Figure 39
)
allows you to record
information about the
particular job, including
system design notes,
firmware upgrades, etc.
This information is not
transferred to the DAB1 — it
is saved only in the system
program file in your
computer.
• The C
LIENT tab (
Figure 40
)
gives you a place to record
your client’s contact
information, along with
information about the
general contractor, interior
designer. etc. Like the
D
EALER information, the CLIENT information is saved only in the system program file in your computer and is not transferred
to the DAB1.
Renaming DAB1s in a System with Multiple Units
To minimize confusion when programming systems with multiple DAB1s we
recommend that you rename each unit to identify it, such as “DAB1 #1 Zones 1-6”, and
“DAB1 #2, Zones 7-12”.
In the S
YSTEM WORKSPACE area of the Device screen (see
Figure 41
), select each
DAB1 in the system and rename each one with a different name.
Figure 39:
J
OB INFO Screen DEALER Tab
Figure 40:
J
OB INFO Screen CLIENT Tab
To Next Page
Loading...
