Sonance DAB1 - MACRO EDITOR; Macro Editor Functions

38
DAB1 DISTRIBUTED AUDIO SYSTEM
3, and that all the IR macro commands for the SOURCE 4 CD
player are routed to P
ROGRAMMED IR PORT 4. This way each CD
player will receive only the commands intended for it.
MODIFYING THE IR LIBRARY
To add new remotes or change commands in the M
ASTER IR
Library you must first create a U
SER IR Library. This preserves
a clean copy of the M
ASTER
IR Library and prevents codes from
inadvertently being deleted or improperly edited.
To modify the M
ASTER IR Library:
1. Open the Sonance Control Manager, open the L
IBRARY
menu and select IR LIBRARY
MANAGER. The IR LIBRARY MANGER
( Figure 49 ) window will open.
2. Select and left click the
USER.
CML folder in the left-hand window.
3. Open the R
EMOTE menu and select IMPORT. The IMPORT FROM IR
L
IBRARY browser window will open.
4. Navigate to the S
ONANCE
CONTROL M
ANAGER program folder. (It will be located in the PROGRAM FILES folder in your
computer’s main hard drive — usually the C: drive.) Double-click the folder to open it.
5. Double-click the COMMAND LIBRARIES folder. The MASTER.CML and USER.CML libraries will appear in the window. Select
M
ASTER.CML and click OPEN. The entire MASTER IR LIBRARY will be imported into the USER.CML library. (The process will take
a couple of minutes.)
6. When the process is complete the I
MPORT SUCCESSFUL
window will open. This is a list of all the remotes imported
into the U
SER.CML folder. You can scroll-through it for
reference. Click OK when you’re finished.
At this point the IR L
IBRARY MANAGER will look like Figure 50 ,
with all B
RAND/COMPONENT/REMOTE folders open. To clean-up
the window:
1. Open the F
ILE menu and select CLOSE. The USER library will close.
2. Open the F
ILE menu again and select OPEN. Select USER.CML
in the browser window. The library will open, with all
brands listed alphabetically.
Figure 49: IR Library Manager
Figure 50: USER.CML IR Library Folder
After Import Process