Sonance Invisible series Installation Instructions

11
13. Connect speaker wire to the appropriate terminal on
the speaker. (Speaker shown with optional enclosure.)
14. Insert speaker into opening.
15. Secure speaker with at least 4 drywall screws on each
side. Top and bottom is optional. Do not over tighten.
EXISITNG CONSTRUCTION
TEST THE SPEAKER FOR 60 SECONDS WITH
AN AUDIO SOURCE BEFORE COVERING WITH
DRYWALL COMPOUND!
This is the last point any wiring corrections can
be made. After test is complete finish securing with
remaining drywall screws.

Sonance Invisible series Specifications

General

Dimensions	Varies by model
Cutout Size	Varies by model
Mounting Depth	Varies by model
Type	Invisible
Power Handling	200 Watts
Impedance	8 Ohms
Installation	In-wall
Sensitivity	89dB
Finish	Paintable
Tweeter	None (uses planar diaphragm technology)
Woofer	None (uses planar diaphragm technology)