Sonance Invisible series Installation Instructions

12
FINISHING INSTRUCTIONS
1. Fill the gap between speaker and drywall with 5 minute
setting type joint compound (hot mud).
2. Feather all edges.
3. Allow hot mud to set slightly before applying
mesh tape.

Sonance Invisible series Specifications

General

Dimensions	Varies by model
Cutout Size	Varies by model
Mounting Depth	Varies by model
Type	Invisible
Power Handling	200 Watts
Impedance	8 Ohms
Installation	In-wall
Sensitivity	89dB
Finish	Paintable
Tweeter	None (uses planar diaphragm technology)
Woofer	None (uses planar diaphragm technology)