Sonance Invisible series Installation Instructions

14
8. Once hot mud has fully cured or hardened, begin to
Build layers of topping compound over speaker.
9. Build layers of compound as needed to obtain a flat surface.
10. Feather in all surfaces.
11. Allow first coat to fully cure or harden.
FINISHING INSTRUCTIONS

Sonance Invisible series Specifications

General

Dimensions	Varies by model
Cutout Size	Varies by model
Mounting Depth	Varies by model
Type	Invisible
Power Handling	200 Watts
Impedance	8 Ohms
Installation	In-wall
Sensitivity	89dB
Finish	Paintable
Tweeter	None (uses planar diaphragm technology)
Woofer	None (uses planar diaphragm technology)