Sonance Invisible series Installation Instructions

15
12. Start a second coat covering the entire surface of
the speaker and all adjoining surfaces.
13. Compound buildup on the active surface of the speaker
should not exceed 1/8” (3mm).
14. Detail the compound to minimize tool marks.
15. Build more coats as necessary to achieve desired finish.
FINISHING INSTRUCTIONS

Sonance Invisible series Specifications

General

Dimensions	Varies by model
Cutout Size	Varies by model
Mounting Depth	Varies by model
Type	Invisible
Power Handling	200 Watts
Impedance	8 Ohms
Installation	In-wall
Sensitivity	89dB
Finish	Paintable
Tweeter	None (uses planar diaphragm technology)
Woofer	None (uses planar diaphragm technology)