NOTE: The PowerBridge Installation Manual shows the
power outlet being installed on to a drywall surface.
In this application, power outlet will be mounted into
the SONANCE Wall Box. (See Figure 9)
POWER BRIDGE INSTALLATION
1. Refer to provided Install Instructions of the Power Bridge
ONE-CK Power Cable Connector Kit.
Power - OUT
Installs Into
Sonance Wall Box
Power - IN
Installs Into
Drywall
SONOS AMP INSTALLATION
1. Use the small 10/32 x 3/4” screw to mount the SONOS
amp to the provided amp mounting bracket. (Figure 10)
Side View
TV BRACKET INSTALL WITH THE
SONANCE TV BOX
1. The SONANCE TV Box is designed to work with your
TV bracket in a number of ways. Option 1 above the TV
box or option 2 below the TV box (Figure 7 and Figure 8)
2. When installing your TV bracket over the Wall Box, insert
the provided spacers between the wall and the outer holes
of the TV bracket on both sides (Figure 7 and Figure 8).
3. Mount your TV bracket using the provided spacers
if needed.
5
Figure 7
Spacer
x 2
Spacer
x 2
Figure 8
Figure 9
Figure 10
2. Attach the SONOS AMP with the bracket onto the
SONANCE TV Box on one of the designated mounting
holes. (Figure 11)
Figure 11
To Next Page
Loading...
