Sonance Silhouette I - Aluminum Frame Architecture; Roto-Lock Mounting System

9
ALUMINUM FRAME ARCHITECTURE
The baffle attaches to an extruded aluminum frame specially tooled for the Sonance Silhouette
speaker. The frame employs a truss design that adds incredible strength and rigidity to the Sonance
Silhouette assembly. This frame design also facilitates the ease of installation attributed to all Sonance
Silhouette speakers.
ROTO-LOCK
™
MOUNTING SYSTEM
Sonance's Roto-Lock mounting system firmly couples the Sonance Silhouette speaker to the wall. By
turning the screws visible on the front baffle of the speaker, a metal tab rotates into place and clamps
the drywall between the mounting tab and the baffle of the speaker assembly. This results in an
extremely secure and non-resonant installation.
Sonance
Silhouette
Frame
Turn Screwdriver to the
Right to Tighten
Wallboard
Bevel Cut
in Wallboard
Roto-Lock shown
in the OPEN position
Sonance
Silhouette Baffle
Board
Roto-Lock
Screw Through
Baffle Board
Roto-Lock shown
in the CLOSED position
CLOSED
OPEN
Figure 1. Sonance Roto-Lock mechanism. The Roto-Lock mechanism is built into every Sonance
Silhouette series speakers. Roto-Lock makes in-wall speaker installation fast and easy.
33-1823 Silhouette Manual 2/16/00 1:36 PM Page 9