Cleaning Your Thin Tube and Dome
If your hearing instrument has a thin tube instead
of an earhook, make sure that the tube and dome
are kept free of ear wax at all times.
· Grasp the adapter firmly
and disconnect the thin
tube from the hearing
instrument by pulling it off.
· Use a soft dry cloth
or tissue to clean the
outside of the thin tube
and dome.
· To remove wax from the thin tube, insert the
cleaning floss into the connector end. Push
the floss all the way into the sound tube until
it comes out through the dome.
· Pull the floss out through the dome and discard it.
· Reattach the thin tube connector to the adapter.
Important!
To avoid blocking the thin tube, do not use
water to clean it.
To Next Page
Loading...
Need help?
General
