SOUND page
C knob START
0.0% - 99.99%：
This sets the playback starting
position in the sample.
D knob
END
(LENGTH)
0.0% - 100%：
This sets the playback range of
the sample.
Auxiliary
right button
1SHOT/ LO OP
1S H O T：
The sample will play from the
START to the END (LENGTH)
while the
TRACK PAD is
being pressed.
L O O P：
The sample will play repeatedly
between the START and the
END (LENGTH) while the
TRACK PAD is being pressed.
• When the playback mode is changed to 1SHOT, AMP ENV is
automatically turned ON. If you want the sample to play to the
end without releasing, such as a drum loop, set AMP ENV to
OFF.
When changed to LOOP, AMP ENV is automatically turned
OFF and so-called GATE playback is performed. If you want the
sample to release when the pad is released, set AMP ENV to
ON.
• Pushing the
A knob to open TAG SEARCH, you can load a
sample into the sample slots.
See TAG SEARCH ( → P.4 9)
• Pushing the C and D knobs to enter the waveform
magnication/reduction mode. (The magnifying glass icon will
light up.)
64
To Next Page
Loading...
