Sonnet Morpheus - Operating

Sonnet MORPHEUS
Operating
Remark: When the Morpheus is fully connected and switched to ”on” for the very first time, the volume will be set to -40dB. Every time when
the Morpheus is removed from mains, this setting is coming back and is built in to avoid excessive volume levels in case that the unit is used as
a digital pre amplifier. During normal use the unit will remember his last setting. When using the Morpheus in conjunction with a normal analog
pre amplifier it can be used in “Fixed mode” In Fixed mode the Morpheus will give a fixed output level, based on user preset value. In fixed
mode the user setting will be stored in memory and always remembered, also after removing the unit from mains.