BASICR3/BASICRFR3
100-240V AC 50/60Hz 10A Max
IEEE 802.11 b/g/n 2.4GHz
PC V0
91x43x25mm
Android & iOS
433.92MHz
100-240V AC 50/60Hz 10A Max
5. Add the device
Sou nd Pair ing
Add dev ice in th is mode i f your
devic e s uppor t this fe ature .
Sca n QR code
GSM dev ices an d devic es with Q R co
de can be a dded in t his mod e.
Quick Pairing
WIF I devic es can be a dded in t his mo
de( make su re the de vice is i n pairi ng
mod e).
Add D evice
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
Wi-Fi
RF
Model
Input
Output
Operating systems
Material
Dimension
BASICR3 does not support the remote controller with 433.92MHz.
Specifications
9
SONOFF TECHNOLOGIES CO., LTD.
English
1
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ”
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle
of two short flashes and one long flash and release. Long press Pairing button
for 5s again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
2
Tap “+” and select “ Compatible Pairing Mode ” on APP.
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
To Next Page
Loading...
Need help?
General
