3. Download APP
eWeLink
eWeLink
Android™ & iOS
4. Power on
After powering on, the device will enter the quick pairing mode (Touch) during the
first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash
and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you
want to enter this mode, please long press the manual button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
SONOFF TECHNOLOGIES CO., LTD.
English
5. Add the device
Tap “+” and select “Quick Pairing”, then operate following the prompt on the APP.
7
To Next Page
Loading...
