5
Operating Instruction
1. Download “eWeLink” App
2. Power on
Power the device through Micro USB cable. After powering on, the device will enter
the Bluetooth Pairing Mode during the first use. The Wi-Fi LED indicator changes in
a cycle of two short and one long flash and release.
The device will exit the Bluetooth Pairing Mode if not paired within 3mins. If you
want to enter this mode, please long press pairing button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
3. Add Zigbee Bridge
To Next Page
Loading...