Need help?Do you have a question about the Sonoff ZB Bridge-P and is the answer not in the manual?
General| Model | ZB Bridge-P |
|---|---|
| Category | Network Hardware |
| Protocol | Zigbee |
| Wi-Fi Standard | 802.11 b/g/n |
| Zigbee Standard | Zigbee 3.0 |
| Operating Voltage | 5V DC |
| Operating Humidity | 5% to 95% RH |
| Casing Material | Plastic |
| Connectivity | Wi-Fi |
| Power Supply | 5V DC |
| Operating Temperature | 0°C to 40°C |
Explains the meaning of different LED indicator patterns for the Zigbee Bridge.
Highlights the Zigbee Bridge's functionality in controlling Zigbee devices and transforming Wi-Fi.
Guide on obtaining and setting up the required eWeLink mobile application.
Steps for powering the device and entering Bluetooth pairing mode.
Instructions for adding the Zigbee Bridge device within the eWeLink application.
Steps to pair secondary Zigbee devices with the Zigbee Bridge.
Specific instructions for pairing the device using an Android smartphone.
Specific instructions for pairing the device using an iOS smartphone.
Methods to mute or disable alarm sounds from the Zigbee Bridge.
Lists brands and models of Zigbee devices compatible with the bridge.
Steps to reset the Zigbee Bridge and its paired sub-devices to default settings.
Troubleshooting guide for issues when pairing Wi-Fi devices with the eWeLink app.
Addresses problems where Wi-Fi devices become unresponsive, checking LED status and connectivity.
Solutions for when the LED indicator shows failure to connect to the internet server.
To Next Page