Sonomed PACSCAN Series

Need help?

Do you have a question about the Sonomed PACSCAN Series and is the answer not in the manual?

Summary

SECTION 2 GETTING STARTED

2.1 UNPACKING AND INITIAL CHECK

Procedure for unpacking the system and verifying all included items.

2.2 SAFETY CONSIDERATIONS AND WARNINGS

Essential safety instructions, general warnings, and cautions for instrument operation.

2.3 SYSTEM SETUP AND CONFIGURATION

Connecting accessories, printer setup, power checks, contrast, and date/time settings.

SECTION 3 A-SCAN OPERATION AND CLINICAL USE

3.1 SELECTING A-SCAN MODE

3.2 CALIBRATION PROCEDURE

Procedure to verify PACSCANTM functionality via calibration before measurements.

3.3 SYSTEM SETUP: USER AND PATIENT INFO

Setting up the A-Scan system by entering user and patient information.

3.4 PATIENT PREPARATION FOR A-SCAN

3.5 PATIENT EXAMINATION TECHNIQUES

Performing A-scan measurements using direct contact or water immersion techniques.

3.6 SOURCES OF ERRORS AND AVOIDANCE

Common errors in A-scan measurements and how to prevent them.

SECTION 4 PACHYMETER OPERATION AND CLINICAL USE

4.1 SELECTING PACHYMETER MODE

4.2 MEASUREMENT ACCURACY AND PROBE TESTS

Verifying Pachymeter system accuracy and probe sensitivity before measurements.

4.3 SYSTEM SETUP: BIAS AND VELOCITY

4.4 PACHYMETER MEASUREMENT MODES

4.5 MULTIPLE READINGS SINGLE POINT

4.6 SINGLE READING MULTIPLE POINTS

4.7 MULTIPLE READINGS MULTIPLE POINTS

SECTION 5 MAINTENANCE AND SERVICE

5.1 ROUTINE MAINTENANCE PROCEDURES

Routine maintenance including system inspection, cleaning, and storage procedures.

5.2 A-SCAN FUNCTIONALITY CHECK

Checking A-Scan probe functionality through calibration.

5.3 PACHYMETER FUNCTIONALITY CHECK

Checking Pachymeter probe sensitivity and measurement accuracy.

5.4 TROUBLESHOOTING THE MEASUREMENT PROCESS

Troubleshooting common symptoms and corrective actions for the PACSCANTM system.