Need help?Do you have a question about the Sonomed 300A and is the answer not in the manual?
Covers important safety instructions, terms as marked on equipment, and general warnings and cautions for safe operation.
Steps for connecting the foot pedal, AC adapter, and probes to the PACSCANTM system.
Procedure for verifying A-Scan functionality by calibrating the instrument using a calibration cylinder.
Steps to enter user information and select IOL formulas and constants for A-Scan measurements.
Details the process of performing A-scan measurements, including direct contact and water immersion techniques.
Guides on determining IOL powers using measurement data and selected formulas, including viewing IOL power tables.
Steps for entering user and patient information for pachymeter measurements.
Process for obtaining corneal thickness measurements, including selecting measurement modes and performing scans.
Addresses common issues encountered during pachymeter measurements and provides corrective actions.
Procedures for checking A-scan calibration and probe sensitivity to ensure accurate operation.
Steps to perform calibration to verify A-Scan functionality and ensure measurement accuracy.
Procedure to test A-scan probe sensitivity, which may degrade over time.
Tests for verifying pachymeter measurement accuracy and probe sensitivity, crucial for reliable results.
Procedure to check the pachymeter's internal calibration and measurement accuracy.
Procedure to test the sensitivity of the pachymeter probe to ensure accurate measurements.
Guidance on resolving measurement issues, electromagnetic interference, and system reset procedures.
General| Resolution | 0.01 mm |
|---|---|
| Transducer Frequency | 10 MHz |
| Measurement Technology | Ultrasound |
| Display | LCD Screen |
| IOL Calculation Formulas | Holladay, Hoffer Q, Haigis |
| Axial Length Range | 14mm to 40mm |
| Image Capture | Automatic |
To Next Page
