Getting Started Section 2
FOR YOUR PROTECTION, please read
these safety instructions completely before
installing, applying power to, or operating
the system.
BEFORE OPERATION, the instrument and this
manual should be reviewed for safety markings
and instructions. Specific warnings and cautions
are found throughout the manual where they
apply. These must be followed to ensure safe
operation and to maintain the instrument in a
safe condition.
REVIEW any other manuals and instruments
supplied with the system in the same manner.
KEEP this manual for future reference.
TERMS AS MARKED ON THE
EQUIPMENT
CAUTION indicates a personal injury hazard
not immediately accessible as one reads the
markings, or a hazard to property, including the
equipment itself.
WARNING indicates conditions or practices
that could result in personal injury or loss of life.
DANGER indicates a personal injury hazard
immediately accessible as one reads the
marking.
TERMS AS USED IN THIS MANUAL
CAUTION statements identify conditions or
practices that could result in damage to the
equipment or other property.
WARNING statements identify conditions or
practices that could result in personal injury or
loss of life.
GENERAL WARNINGS
Use only the AC Adapter that is supplied with
the system.
To avoid explosion, DO NOT operate this
product in the presence of flammable gases or
fumes. Operation of any electrical instrument in
such an environment constitutes a definite safety
hazard.
To avoid personal injury, DO NOT remove the
product covers or panels.
No user serviceable parts inside. DO NOT
attempt to service the system except as described
in the operating instructions. For all other
servicing refer to qualified service personnel.
GENERAL CAUTIONS
In particular DO NOT cover instrument with
dust cover when power is being applied to the
instrument.
Guard against any small objects or liquid from
entering the instrument.
Unplug the AC Adapter from the outlet when
the instrument will not be used for an extended
period of time.
The system should be placed on a level, stable
surface during operation. A system and cart
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may
cause the system and cart combination to
overturn.
2.2
SAFETY CONSIDERATIONS
!
2 - 2 Doc # 0300-A-1901-3D
To Next Page
Loading...
