Need help?Do you have a question about the SonopTek BFM-1 and is the answer not in the manual?
General| Accuracy | ±1% of reading |
|---|---|
| Flow Rate Range | 0.03~12 m/s |
| Pipe Size Range | DN15~DN6000 |
| Operating Temperature | -4 to 176°F (-20 to 80°C) |
| Power Supply | 8 to 36 VDC |
| Output | 4-20 mA, pulse |
| Display | LCD |
Details the primary applications of the device, including back fat measurement and animal identification.
Lists the physical dimensions and weight of the BFM-1 Back Fat Meter.
Specifies the operating and storage temperature ranges and maximum humidity.
Details technical specifications of the backfat measurement function, including transducer and range.
Outlines the specifications for the ear tag reading capability, including standard and frequency.
Lists electronic specifications like battery capacity, working time, communication mode, and waterproof rating.
Describes the process of unpacking the device and checking its contents for completeness and defects.
Explains the function of each button and the physical positions for scanning on the device.
Guides on connecting the device to mobile terminals via Bluetooth for data transfer.
Instructions on applying gel correctly to the test site before taking a backfat measurement.
Step-by-step guide on how to perform a backfat measurement using the device.
Provides instructions on how to charge the device's battery using the USB charger.
Explains the calibration process to ensure accurate measurements, using a calibration cylinder.
Details the recommended method for cleaning the device using a soft cloth or paper.
Provides guidelines for storing the device safely when not in use, protecting it from temperature extremes.
Lists general care and maintenance tips for the BFM-1 Back Fat Meter, including handling and charging.
To Next Page