3
FOR YOUR PROTECTION, please read these safety instructions
completely before applying power to, or operating the system.
The BFM-1 Back Fat Meter is carefully packed to prevent damage
during shipment. Before unpacking, please note any visible damage to
the outside of the shipping containers.
Items should be checked in order to ensure that all ordered items
have been received. The following table lists the items which should be
received with each particular system.
Each item should be examined for any noticeable defects or damage
that may have occurred during shipment although it is packed carefully.
If any defect or damage exists, please contact to your local
representative immediately to report the problem.
Back Fat Meter Calibration Cylinder
BFM-1 Back Fat Meter Operators’ Manual