SonopTek BFM-1 User Manual

11
5. Ear tag Scanning
1) Press the ‘Power/Scan’ button to scan (see figure5-1).
Figure 5-1 scanning
2) If there is no tag scanned in 10 seconds, the information will be
shown on the screen(see figure 5-2). You can press the
‘Power/Scan’ button to scan again.
Figure5-2 No Tag
3) If a tag is scanned, the tag number will be shown on the
screen (see figure 5-3).
Figure 5-3 tag number displayed

SonopTek BFM-1 Specifications

General

Brand	SonopTek
Model	BFM-1
Category	Measuring Instruments
Language	English