SonopTek BFM-1 - Page 7

5
Press the ‘Power/Scan’ button to power up the Meter, the name
and the model of the device will be showed on the screen. After the
Meter turned on, the Meter gets ready to measure.
The Meter can be turned off by hold down the ‘Power/Scan’ button
for seconds.
You can scan by pressing the ‘Power/Scan’ button or quit the
scanning operation by pressing the ‘Enter’ button.
The device will shut down automatically in 10 minutes, if you don’t
use it.
2) General Setting
Press the ‘Set’ button to enter the menu setting interface, there are
6 options you can choose (form 3-1). Press the ‘Set ‘button to choose the
option (mark >), press the ‘Enter’ button to enter and the ‘Power/Scan’
button to return to the previous menu.
Form 3- 1 menu setting
1
BACK FAT MODE:
You can press ‘Enter’ button to enter the back fat reading interface, and
press ‘Power/Scan’ button to measure.
2
EAR TAG MODE:
You can press ‘Enter’ button to enter the tag reading interface, and press
‘Power/Scan’ button to scan.