TV Audio Swap
Instantly swap TV audio from a compatible Sonos soundbar to your Sonos Ace and feel
enveloped in exhilarating surround sound and spatial audio.
Note: Only TV audio (via HDMI or optical) can stream to Sonos Ace.
Use the Sonos app to set up the connection between your Sonos Ace and a compatible
soundbar. Make sure your products are up to date and WiFi is enabled before using TV
Audio Swap.
Set up from the Home screen
Before you start, make sure your Sonos Ace remains powered on and within 30 ft (9.1 m) of
your Sonos soundbar during TV Audio Swap.
1. Go to the Sonos app.
2. Target your Sonos Ace from the system view.
3. Select Set Up on the Home screen to get started.
4. After TV Audio Swap is set up, select Swap to connect to the soundbar.
Set up from Settings
1. Go to the Sonos app.
2. Go to System Settings , then select your Sonos Ace.
3. Select + Add TV Audio Swap to get started.
Select Swap Back to end a TV Audio Swap session.
Features and settings
During a TV Audio Swap, you can listen with Spatial Audio and dynamic Head Tracking to
for the most immersive experience possible.
To Next Page
Loading...