Power and charging
Use a USB-C to USB-C cable (included) and a compliant power adapter (not included). While
your Sonos Ace is connected to a power adapter, you can continue listening to a Bluetooth-
connected device.
Low battery
When the battery level reaches 10% power, you’ll hear a tone and the status light will flash
orange.
Light Description
Flashing orange Between 0% and 10% battery remaining.
Charging
After connecting your Sonos Ace to power:
1. The status light shows solid orange when your headphones are plugged in and charging.
2. The status light will show solid green when your headphones are plugged in and reach
full charge.
Light Description
Solid orange
Plugged in and charging normally. Below
100% charge.
Solid green
100% battery. You can unplug your
headphones.
Flashing red
Charging error. Unplug your headphones
from power.
To Next Page
Loading...